Mikropor AS VE Print & Filz
Mikropor AS Print is a sound absorbing acoustic image, which can either be affixed to the wall using adhesive or by means of a frame. The core of the acoustic image (absorber) consists of an open cell melamine resin foam (Basotect®) with a decorative fabric made from class B1 polyester (flame resistant).
The surface is printed using an environment-friendly direct sublimation method of printing.
The sides of the absorber are not printed and not covered with decorative fabric. Mikropor AS Print both decorates and optimizes the acoustics in a room at one and the same time, because it reduces the reverberation time. It is possible to enhance the frame profiles appropriately by means of a powder coating kept as neutral as possible to blend in with the image and surroundings.
MIKROPOR® AS PRINT made of melamine resin foam (Basotect®)
The wide variety of available formats through to customized free-forms and 3D bodies, different thicknesses and surfaces mean it is possible to individually design acoustic concepts and adapt the product to fulfil specific requirements. It goes without saying that in addition to ceiling systems, acoustic partial areas and ceiling cloud solutions we also offer wall absorbers.
This product achieves impressive results in particular when making improvements to the acoustic environment; thanks to its low weight of just 600 g/m² (40 mm thickness) it can be affixed retrospectively to practically all existing wall and ceiling systems.
The almost unbelievable sound absorption values make this product an ideal building material to optimize the acoustics in a room.
This product is ideally suited to optimize the acoustic environment, in particular in rented properties. Acoustical clouds and wall absorber elements that can be hung up as simply as a picture can be easily taken with you when moving to a different premise or relocated when converting a space.
Properties:
- Building material class:
Core panel B1 (flame resistant)
with decorative fabric finish - Many colours possible
- Formats up to 2500 x 1250 mm
- Form cuts possible
- Edges chamfered
- Just 40 mm thick and variable
- Very lightweight material
- Excellent absorption values
| Technical data | Standards | Units | Values |
|---|---|---|---|
| Apparent overall density | EN ISO 845 | 8-11 kg/m3 | |
| Thermal conductivity (at 10 °C / = 50 mm) | DIN 52 612 | < 0.035 W 1 mK | |
| Compression strength | EN ISO | 3386-1 kPa | 5-10 |
| Tensile strength | ISO | 1798 kPa | >90 |
| Elongation at break | ISO 1798 | ISO 1798 | >10 |
| Maximum application temperature (defined to ISO 3386-1) | DIN EN ISO 2578 | °C | |
| 1000 h | 220 | ||
| 5000 h | 200 | ||
| 20000 h | 180 |
A direct sublimation print method is used to print the surfaces of Mikropor AS Print foam panels.
MOTIFS
- Individual, desired motifs (e.g., company or club logos, advertising images, portraits, holiday snaps etc.)
- Monochrome prints
We would be more than happy to send you a sample.
Feel free to contact us.
Environmental protection
MIKROPOR® AS melamine resin foam (Basotect®) is manufactured without using any halogenated hydrocarbons, flame-retarding substances and /or toxic heavy metals.
MIKROPOR® AS melamine resin foam (Basotect®) is not hazardous to water. The product is free of propellants on delivery and not subject to labelling regulations in line with legislation covering dangerous substances.
MIKROPOR® AS melamine resin foam (Basotect®) is certified to the Oeko-Tex standard 100.
With you in mind, we have introduced:
An integrated management system for quality, environment and occupational health and safety. An expert assessment documented in a report verifies that the management system fulfils
requirements and, as a consequence, the core stipulations of the following standards:
ISO 9001:2000
ISO 14001:2004
ILO guidelines on occupational safety and health (2001)